Knowledge base

TECH SUPPORT
PHASE ONE AND MAMIYA- LEAF TECHNICAL SUPPORT

Get technical support for your camera systems and software. Please check our Knowledge base and documentation section before creating a support case.

 

Our technical support is available almost 24 hours a day, every buisness day.

 

It requires an online account to create a case for technical support.

 

Contact tech support 

ARTICLE
Search
    Knowledgebase article

    Article ID 1807
    Summary Hasselblad H System: Mounting the viewfinder mask and connecting the Flash Sync.
    Problem I need to know the correct way to mount the Viewfinder Mask and the Sync Cable for the Hasselblad H series camera?
    Solution The image area of the Hasselblad H Camera System is approximately 6cm x 4.5cm. However several digital backs have a CCD that is smaller than that measurement and require a viewfinder mask to provide an accurate reference when composing an image.

    When you purchase a Phase One Digital Back the thin reference mask is provided. This mask has to be mounted below focusing screen. The viewfinder mask is positioned in the bracket that holds the focusing screen.



    Mounting the P/P+ Back:

    The H mounted backs (both H and P/P+ series) integrates fully with the H camera house and acts as a part of the whole camera system.

    When no cassette is attached to the Hasselblad camera house the mirror is up and the shutter is open.

    When attaching the Digital Back to the camera house, the shutter will close and the mirror comes down.



    It is important to ensure that the bottom part of the H mount camera back is pressed well into the locking mechanism before the upper locking mechanism is pressed together.


    Use of cables



    No cables are required between the H Mount Back and the Hasselblad H Camera system .
    When using a Flash system and connecting it directly to the camera a Flash sync cable must be connected to the Hasselblad H camera house.



    The flash sync cable must NOT be connected to the camera back when used on a Hasselblad H Camera system. The flash sync connector on the Camera back is only intended for use with a Phase One FlexAdaptor, or other large format adaptors.


    Last updated December 13, 2013

    Related Articles

    H1 viewfinder information

    VIDEO: Inserts for Contax

    VIDEO: Inserts for Hasselblad V

    VIDEO: Inserts for Mamiya/Phase One 645