X
搜索结果:
Only in Chinese
|
|
|
|
|
|
|
I'm assuming the \"DSL Noise Reduction\" is the problem but...I have a \"test image\" of a friend of mine - an older pock marked face that needs to be shaved with strong pores. It turns out to be an excellent image for comparing image detail.What I found is that if I convert it with Adobe Camera Raw I get the maximum amount of detail (and it looks very natural), next is Fuji EX software (less detail, but also less natural), then C1 (very natural, less detail), then Bibble (by far the worst). Note that ACR beating Fuji EX is contrary to what I've read - EX is supposed to be the best by far...
Language: : English
I created a support case for this but thought maybe some users could shed some light on these issues as well....We were previously shooting with a G4 Powerbook and just recently upgraded to a 17 inch MBP with 2 GIGs of ram. The good news is the processing speed is dramatically improved. The bad news is previews in capture one are way off compared to the processed file. Way way oversaturated. I realize it is just a preview and it isnt going to be 100% on with the processed file but these previews are way too saturated. I tried going into the terminal and deleting colorsync preferences and ...
Language: : English
i'm pretty familiar with color management in PS CS, but i have an \"ah ha\" question about using C1 LE v3.7x.if i set the output destination (working space) to the profile i use for my printer and paper, is that pretty much soft-proofing my image?there is not an option for setting conversion to Relative Colormetric or Perceptual, so is that a good thing or bad thing? nor is there an option to specifiy a color engine to do the conversion.using the printer and paper profile in C1 LE might prove to dramatically reduce workflow time.thanks in advanceStevewell, i answered my own que...
Language: : English
I downloaded C1LE and activated the software (latest version 3.7.4). Clean install, nothing else running on my system at the time. A exceed the installation req's (on WinXP)I launched LE and browsed to my CF card. A number of RAW shot with my Canon 300D on it.Man, sloooooowwwww. Doesn't even finish loading the 20 or so RAW previews before I get ghost windows, NOT RESPONDING etc. I shut all other programs down (just browser windows) and wait, wait, wait and nothing. I then loaded just one RAW image into a new folder and tried to load that. Still terribly slow. Once it loads when I click on...
Language: : English
I'm interested in buying CaptureOne pro for my company but am have had not luck when connecting the camera. it just says that the connection has failled.at the moment im just running the demo of the website.i tryed changing the iousb kext but no luck with that so i tryied my other camera canon 300d and changed all the settings and everything and it worked first time so i changed back the settings to the 30d and i still got nothing.i would apreciate any help at allthanksHelloThe Canon 30D is yet not supported tethered.This is because componentes for this was not available from C...
Language: : English
according to the bug report on this forum:If you zoom above 400% in the preview window, you can for Canon 1D, Canon D30, Nikon D1X and Nikon D100 experience a difference in where you place the image and where the developed image appear i have a canon 10D. if i zoom to 400%, use the bottom scroll bar to scroll all the way to the left side of the preview picture, the image shifts to the left such that the whole left side is cropped off, once the developed image appears. also, scrolling all the way to the top (either on the left side or right side), the image shifts up by a smaller amount ...
Language: : English
Is there any plan on improving the C1 manuals? Most settings are extremely minimally documented, the process (workflow) itself isn't well documented, and there are settings that don't even have any help at all for them (like \"DSLR noise reduction\").Additionally, there don't seem to be any suggestions as to what reasonable values to use given certain situations. For instance, it would be very helpful to give some advice what values to start from with sharpening for various situations. Some \"best practices\" would be really helpful.I know there is a lot more to say - it's a good and powe...
Language: : English
I replaced the logic board on my powerbook which required reinstallation of all softwares including Capture One. Installation was successful but the activation code no longer works. Does anyone have an insight on this? Thanks.Hi there,For this type of issue, you will need to open a support case on the phaseone.com website.CheersDid that too. Thanks.My next step would be to contact my \"local\" official Phase One reseller / rep. That's what I do and it works.
Language: : English
Am I allowed to install a copy of my version of C1 LE on my Dads pc and, if so, where do I find the number to activate it?ThanksTrudyTrudy,The complete License Policy can be found in this Knowledge Base article:http://www.phaseone.com/Content/Support ... nguageid=1In general, it is: 1 User = 1 License = 2 Computers ActivatedRegards, k c
Language: : English
Hello everyone,I am a new member of this forum. Can someone be kind enough to give me some suggestion regarding the Color contrast , color saturation and focus settings for Phase one shot with Nikon D2h and Olympus E1?Thank you in advance. I am new using C1 and your help will be greatly appreciated.Jimmy
Language: : English
Please wait!